How to check whether the oil consumption of diesel generator sets is too high?

Diesel generator fuel in the normal operation of the unit will produce a normal value of consumption, but the perception for some users always feel that their diesel generator oil consumption is often on the high side so this article will provide you how to check the high oil consumption.

1.Check whether there is oil leakage outside the diesel generator set, usually in most cases is because the user is not thorough enough for their inspection for the oil leakage and wrongly assume that the oil consumption is too high. The most common oil leakage location check should be with the oil pan and oil drain bolts, rocker room cover, oil filter seating, turbocharger and the oil seal of the front part (back part) of the crankshaft . The checking should focus mainly on the oil seal to see whether there are any rolled edges, fractures and other phenomenon leading to oil leakage. If the amount of oil leakage is small and not easy to be detected visually, you can choose to use fluorescent tracer to help determine the source of leakage.



2. Using the correct type of engine oil while paying attention to oil changing intervals and using high quality and appropriate engine oil oil in addition to website the engine oil filter change intervals are key factors in maintaining engine performance and durability. Extending engine oil and filter change intervals beyond the recommended values will shorten the engine life span and causing abnormal oil consumption due to factors such as corrosion, residue and wear.



In addition to identify and diagnosis more info of the causes for high engine oil consumption, confirming the real and true oil consumption value is also a very important part of the process. This is to obtain an accurate fuel ratio and is necessary to have two inspection of the engine within a cycle.



First time: put the unit on flat get more info ground, run the engine until the water temperature reaches above 60℃, stop the engine and drain out all the engine oil, change the oil filter and fill the engine oil to the upper scale line, seal the oil filling port and oil drain website bolt, and clear all the short term engine oil consumption data from the ECM

Second time: Check the converted fuel consumption and measure the engine oil consumption to get the accurate engine oil to fuel ratio.



Through long-term experience, the maintenance of the air intake system, using the correct engine oil, website and also the filter elements will have great impact on engine oil consumption. In order to have a more ideal engine oil to fuel ratio, the user should pay attention to the correct selection of high-quality engine oil and with regular maintenance servicing of the diesel generator sets.



Keywords:oil consumption、 diesel generator、oil leakage、fluorescent tracer、engine、oil filter

Leave a Reply

Your email address will not be published. Required fields are marked *